RSS Feed
|
|
 |
|
| Author or Manufacturer: GVST (Graham Yeadon) | ||||||
Subscribe Free! to the DigiFreq Pro Audio and Music Technology Newsletter
|
||||||
|
GHi is a resonant high-pass filter. It is used to remove all frequencies from a signal below a given cut-off point. Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted. Resonance can create large peaks in the output. Because of this, the GUI features a peak display showing the maximum peak output level. The peak display is reset by clicking on it. High-pass filters are especially useful for removing unwanted or inaudible bass frequencies. In a mix, you usually want the bass to come from one or two specific tracks. Removing the bass from the other tracks can make mixing easier and help eliminate "mud" from the final mix. Parameters: * Gain: The gain applied to the incoming signal. * Cut Off: The cut-off frequency. Frequencies below this will be removed. * Res: The resonance of the filter. Download at: GVST GHi High-Pass EQ Effect Plug-In (Windows - Free) Subscribe Free! to the DigiFreq Pro Audio and Music Technology Newsletter
|
| [Back to the Downloads Index] |
