RSS Feed
|
|
 |
|
| Author or Manufacturer: GVST (Graham Yeadon) | ||||||
Subscribe Free! to the DigiFreq Pro Audio and Music Technology Newsletter
|
||||||
|
GComp2 is a compressor featuring a band-pass filter and a gate. The compression is controlled with the Attack, Release and Compress parameters. The Compress parameter controls the compression curve, replacing the usual threshold and ratio parameters. The level of the signal going into the compressor also affects the result. The Gain parameter controls the input gain. The Output parameter can be used to control the output level. The gate is actually an expander, which turns the signal down when it drops below a given threshold. The Gate parameter sets that threshold. Parameters: * Gain: The gain applied to the incoming signal. * Lo Cut: Frequencies below this will be filtered out. * Hi Cut: Frequencies above this will be filtered out. * Attack: The compression attack time. * Release: The compression release time. * Compress: The compression amount. * Gate: The gate threshold. * Output: The gain applied to the signal before output. Download at: GVST GComp2 Compressor Effect Plug-In (Windows - Free) Subscribe Free! to the DigiFreq Pro Audio and Music Technology Newsletter
|
| [Back to the Downloads Index] |
