RSS Feed
|
|
 |
|
| Author or Manufacturer: GVST (Graham Yeadon) | ||||||
Subscribe Free! to the DigiFreq Pro Audio and Music Technology Newsletter
|
||||||
|
GBand is a band-pass filter. It removes frequencies from the input that are above or below the specified cut-off points. GBand uses a high- and a low-pass filter in series to remove the unwanted frequencies. Band-pass filters are useful during mixing to remove unnecessary frequencies from a track. A track that sounds fine on its own can sometimes be difficult to fit into a mix. Narrowing its frequency range will often help. Resonance boosts the volume of frequencies around the cut-off points. This can create large peaks in the output. Because of this, the GUI features a peak display showing the maximum peak output level. The peak display is reset by clicking on it. Parameters: * Gain: The gain applied to the incoming signal. * Lo Cut: The lower cut-off frequency. Frequencies below this will be removed. * Hi Cut: The upper cut-off frequency. Frequencies above this will be removed. * Res: The resonance of the high- and low-pass filters. Download at: GVST GBand EQ Effect Plug-In (Windows - Free) Subscribe Free! to the DigiFreq Pro Audio and Music Technology Newsletter
|
| [Back to the Downloads Index] |
